Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Terblend® N NM-19 XP - (ABS+PA6) - INEOS Styrolution

Material Data Center offers the following functions for Terblend® N NM-19 XP:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Terblend N datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Terblend® N NM-19 XP is an UV stabilised ABS/PA blend combining very high impact strength, even at low temperatures with an outstanding processability and excellent surface appearance.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 40 / * cm³/10min ISO 1133
温度 240 / * °C -
荷重 10 / * kg -
成形収縮率, 平行 0.7 / * % ISO 294-4, 2577
成形収縮率, 直角 0.8 / * % ISO 294-4, 2577
溶融時の密度 928 kg/m³ -
溶融時の熱伝導率 0.156 W/(m K) -
溶融時の比熱 2410 J/(kg K) -
突き出し時の時の温度 90 °C -
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 2000 / 1400 MPa ISO 527
降伏応力 43 / 34 MPa ISO 527
降伏ひずみ 3.5 / 5.5 % ISO 527
破壊呼びひずみ 30 / 35 % ISO 527
シャルピー衝撃強さ, +23°C N / - kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / - kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 65 / - kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 15 / - kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 65 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 85 / * °C ISO 75-1/-2
ビカット軟化温度, B 102 / * °C ISO 306
線膨張係数, 平行 100 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 1.6 / * mm -
厚さhでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 3.2 / * mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 100Hz 3.3 / - - IEC 62631-2-1
比誘電率, 1MHz 2.9 / 3.3 - IEC 62631-2-1
誘電正接, 1MHz 150 / 550 E-4 IEC 62631-2-1
体積抵抗率 >1E13 / 1E11 Ohm*m IEC 62631-3-1
表面抵抗率 * / 1E14 Ohm IEC 62631-3-2
耐トラッキング性 600 / 600 - IEC 60112
その他の特性.乾燥/調湿単位テスト基準
吸湿率 1.2 / * % Sim. to ISO 62
密度 1070 / - kg/m³ ISO 1183
機能
せん断弾性率-温度. , Terblend® N NM-19 XP, (ABS+PA6), INEOS Styrolution
応力-ひずみ (等時的). 23°C, Terblend® N NM-19 XP (調湿), (ABS+PA6), INEOS Styrolution
クリープ弾性率−時間. 23°C, Terblend® N NM-19 XP (調湿), (ABS+PA6), INEOS Styrolution
クリープ曲線 23°C, Terblend® N NM-19 XP (調湿), (ABS+PA6), INEOS Styrolution
応力-ひずみ (等時的). 60°C, Terblend® N NM-19 XP (乾燥), (ABS+PA6), INEOS Styrolution
クリープ弾性率−時間. 60°C, Terblend® N NM-19 XP (乾燥), (ABS+PA6), INEOS Styrolution
クリープ曲線 60°C, Terblend® N NM-19 XP (乾燥), (ABS+PA6), INEOS Styrolution
pvT , Terblend® N NM-19 XP, (ABS+PA6), INEOS Styrolution
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
光安定化., 紫外線安定化., 熱安定化.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 2 - 4 h

PROCESSING
injection molding, Melt temperature, range: 240 - 270 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 40 - 80 °C
injection molding, Mold temperature, recommended: 60 °C
耐薬品性
酸
40wt％硝酸 (23ﾟC)
38wt％硫酸 (23ﾟC)
40wt％硝酸 (23ﾟC)
ケトン系溶剤
アセトン (23ﾟC)
エーテル溶剤
ジエチルエーテル (23ﾟC)
その他
エチルアセテート (23ﾟC)
過酸化水素 (23ﾟC)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.